Anycubic Resin 1L

Printing information: 

  • Main material: resin monomer & photo initiator
  • Exposure parameters: Bottom exposure time(s) 20-60s, normal exposure time(s) 5-15s

 

Storage method: 

  • Keep away from light seals at room temperature. (Sunshine contains a lot of UV light, will solidify photosensitive resin. After testing, the light is not affected as long as it is not UV light).
  • It is recommended to save at 15 ℃ -35 ℃ ambient temperature, the lower the temperature, the higher the viscosity of the resin. Sealed storage, excessive dust or moisture can affect print quality. Sunshine contains a lot of UV light, will solidify photosensitive resin. 

 

Usage: 

Shake well before use, prohibiting the use of resin in places where there is a lot of sunlight.

  • Wear gloves before use to avoid direct contact with the skin and keep the room ventilated.
  • Inadvertent contact, as soon as possible to use a lot of water rinse. If you feel unwell, seek timely medical attention.
  • Printed models need to use high-concentration alcohol to clean about 30S (recommended concentration of 95% or more, the higher the better).
  • Do not pour the resin in the resin vat into the unused resin, do not leave the resin in the resin vat for a long time without use to avoid resin pollution affect the printing effect(long time without the resin can be introduced into airtight containers or sealed with plastic wrap shading save).
  • Resin has a shelf life of up to 18 months.
    £34.99 Regular Price
    £32.49Sale Price
    Colour

    ©2019 by TechnoGeek 3D. TG3D - T&C's

    Contact Us

    TecnhoGeek 3D LTD, United Kingdom

    technogeek3d@gmail.com